Infinite Peripherals 216, KPM-210

3. PRINTER FUNCTIONS

KPM210/216 423-

; cs; rs; ns; bs; as; CSG; cs; rs; ns; bs; as; CSG ; cs; rs; ns; bs; as; CSG ; cs; rs; ns; bs; as; CSG; cs; rs; ns; bs; as; CSG

[Name] Select count mode (B)

[Format] ASCII GS C ; sa ; sb ; sn ; sr ; sc ;

Hex 1D 43 3B sa 3B sb 3B sn 3B sr 3B sc 3B

Decimal 29 67 59 sa 5 9 sb 59 sn 59 sr 59 sc 59

[Range] 0 ≤ sa, sb, sc ≤ 65535

0 ≤ sn, sr ≤ 255

These values are all character strings.

[Description] Selects a count mode for the serial number counter and

specifies the value of the counter.

• sa, sb, sn, sr and sc are all displayed as ASCII characters

using codes from ‘0’ to ‘9’.

• sa and sb specify the counter range.

• sn indicates the unit amount for counting up or down.

• sr indicates the repetition number when the counter value is

fixed.

• sc indicates the counter value.

[Notes] • Count-up mode is specified when:

sa < sb and sn ≠ 0 and sr ≠ 0

• Count-down mode is specified when:

sa > sb and sn ≠ 0 and sr ≠ 0

• Counting stops when:

sa = sb or sn = 0 or sr = 0

• In setting count-up mode, the minimum value of the counter

is sa and the maximum value is sb. If counting up reaches a

value exceeding the maximum, it resets to the minimum

value. If the counter value set by sc is outside the counter

operation range, the counter value is forced to convert to the

minimum value by executing GS c.

• In setting count-down mode, the maximum value of the

counter is sa and the minimum value is sb. If counting down

reaches a value less than the minimum, it resets to the maxi-

mum value. If the counter value set by sc is outside the

counter operation range, the counter value is forced to con-

vert to the maximum value by executing GS c.

• Parameters sa to sc can be omitted. If omitted, they remain

unchanged.

• Parameters sa to sc cannot contain characters other than ‘0’

to ‘9’.

(Tab.A.3)