Infinite Peripherals 216, KPM-210

3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS

KPM210/216

493-

• In count-up mode, if the counter value set by this command

goes out of the counter operation range set by GS C 1 or

GS C ; it is forced to revert to the minimum value.

• In count-down mode, if the counter value set by this com-

mand goes out of the counter operation range set by GS C 1

or GS C ; it is forced to revert to the maximum value.

[Default]

[Reference] GS C 0, GS C1, GS C 2, GS C ;

[Example]

]m[neSG]m[neSG ]m[neSG ]m[neSG]m[neSG

[Name] Ejector commands

[Format] ASCII GS e n [m]

Hex 1D 65 n [m]

Decimal 29 10 1 n [m]

[Range] 1 ≤ n ≤ 6

[Description] This command checks tickets ejector.

n = 1

n = 2 Ticket retracted (only if Paper retracting is enabled)

n = 3 Ticket produced with m steps (1 step = 0.625 mm)

n = 4

n = 5 Ticket ejection

n = 6 Transmit the status byte of the ejector

tiBnO/ffOxeHlamiceD nuFnoitc

0ffO000 .ecnadnubanitneserprepaP

nO101 .dnerepapraeN

1Off00 0 OotdexiF.desutoNff.

2ffO000 .)tneserptonrepap(rosnesdnerepaP

nO404 .)tneserprepap(rosnesdnerepaP

3ffO000 .tuptuoehtnotneserptontekciT

nO808 .tuptuoehtnotneserptekciT

4Off00 0 rotomreppetss'retnirPo.ff

nO0161rotomreppetss'retnirPno.

5ffO000 .fforotomrotcejE

nO0223.norotomrotcejE

6ffO000 .rorretoN

nO0446.rorrE

7ffO000 .etuorrepapeerF

nO08821 .majrepaP