Infinite Peripherals 216, KPM-210

3. PRINTER FUNCTIONS

KPM210/216 123-

[Notes] • The character spacing is added on right of each character.

• The right character spacing for double-width mode is twice

the normal value.

When the characters are enlarged, the right side character

spacing is m (2 or 4) times the normal value.

• The horizontal and vertical motion units are specified by GS

P. Changing the horizontal or vertical motion units does not

affect the current right side spacing.

• The GS P command can change the horizontal (and verti-

cal) motion unit. However, the value cannot be less than the

minimum horizontal movement amount.

• In standard mode, the horizontal motion unit is used.

• The maximum right side spacing is:

255/204 inches for the 204 dpi model

255/300 inches for the 300 dpi model.

[Default] n = 0

[Reference] GS P or GS $D0

[Example]

n!CSEn!CSE n!CSE n!CSEn!CSE

[Name] Select print modes

[Format] ASCII ESC ! n

Hex 1 B 21 n

Decimal 27 33 n

[Range] 0 ≤ n ≤ 255

[Description] Selects print modes using n (see table below):

(Tab.A.3)