Infinite Peripherals 216, KPM-210

1. INSTALLATION AND USE

KPM210/216

71-

- Re-tighten the fastening screws (2).

WARNING

• Assemble the side guides so that they are aligned and perpendicular to

the paper load opening.

1.4.4 Paper jams

In the event of a jam along the paper path, proceed as follows:

Turn the printer on and off before removing the paper in order to cut the

paper and attempt to have it ejected.

If this does not solve the problem, proceed as follows:

Paper jammed on ejector (see fig. 1.8):

1) Lift the roller cover (1) .

2) Remove any pieces of paper present in the ejector rollers (2).

3) Remove any paper present in the paper exit opening(5) .

(5) N.B.: The paper exit opening may be assembled in one of two

positions, depending on the model in use (see fig. 1.2).

Paper jammed before the cutter (see fig. 1.8), lift the paper guide (3) and

perform one of the two operations below:

1) Lift the head lever (4) and pull the paper back (5); remove any pieces of

paper.

2) Remove the print head (see section 1.4.5) and pull the paper back (5);

remove any pieces of paper.