Infinite Peripherals KPM-210, 216 user manual ESC $ and ESC, GS C 0 n m, Select counter print mode

3. PRINTER FUNCTIONS

[Description]	Turns white/black reverse printing mode on or off.
	• When the LSB of n is 0, white/black reverse printing is
	turned off.
	• When the LSB of n is 1, white/black reverse printing is
	turned on.
[Notes]	• Only the LSB di n is effective.
	• This command is available for both built-in and user-defined
	characters.
	• This command does not affect bit image, downloaded bit
	image, bar code, HRI characters and spacing skipped by HT,
	ESC $ and ESC \.
	• This command does not affect white space between lines.
	• White/black reverse mode has a higher priority than under-
	line mode. Even if underline mode is on, it will be disabled
	(but not cancelled) when white/black reverse mode is se-
	lected.
[Default]	n = 0
[Reference]
[Example]

GS C 0 n m

[Name]	Select counter print mode
[Format]	ASCII	GS	C	0	n	m
	Hex	1D	43	30	n	m
	Decimal	29	67	48	n	m
[Range]	0 ≤ n ≤ 5
	m = 0, 1, 2, 48, 49, 50
[Description]	Selects a print mode for the serial number counter.

•n specifies the number of digits to be printed as follows: when n = 0, the printer prints the actual digits indicated by the numeric value.

when n = 1 to 5, the command sets the number of digits to be printed.

•m specifies the printing position within the entire range of printed digits as follows:

www.ipcprint.com 3-39

KPM210/216