14
Setting up th e Projector
Do you want to control the computer’s mouse from the projector’s
remote or keypad?
1Unplug the mouse from your Macintosh or locate an unused
ADB connector.
2Plug the end of the CableWizard mouse cable into the
mouse connector or the (ADB) connector on your
Macintosh.
3Plug the end of the CableWizard mouse cable into the
connector on the CableWizard.
FIGURE 12
Connecting the CableWizard monitor, audio and mouse cables to a Ma cintosh desktop
computer
Now you’re ready to power up the projector and the Macintosh.
Skip to “Powering up the Projector and Adjusting the Image” on
page21.
audio cable
monitor cable
mouse comput er cable
cable