InFocus 210, 220 manual Using the Disk Mouse, Using the On-Screen Menus

U s i n g t h e P r o j e c t o r

NOTE: Using a light touch on the

disk mouse often gets the best

results.

Using the Disk Mouse

Press anywhere on the edge of the disk mouse to move the cursor on the screen. For example, if you press the top edge of the disk, the cursor moves up the screen; if you press the bottom edge, the cursor moves down (Figure 28). You can move the cursor at any angle by pressing the corresponding edge of the disk.

press here to move the cursor up

press here to move the cursor down

FIGURE 28

Using the disk mouse

Using the On-Screen Menus

The projector has four on-screen menus that allow you to make image adjustments and change a variety of settings. Most of these adjustments aren’t available directly from the remote or keypad.

To open the on-screen menus, press the menu button on the remote or keypad. Press menu again when you want to close the menus.

To select a menu, use the disk mouse to move the cursor to the tab for the menu you want, then click either mouse button.

disk mouse

left mouse	right mouse
button	button

FIGURE 29

Disk mouse and mouse buttons

32