27
To raise the projector:
1Raise the front of the projector off the table by lif tin g up on t he
handle (Figure 25).
2While holding the projector, press and hold the quick-release
button (Figure 25).
3When the projector is the height you want, release the button
to lock the elevator foot into position.
4If necessary, use the leveling knob (Figure 24) to adjust the
angle of the projected image.
FIGURE 25
Adjusting the h eight of the projector
CAUTION: Always hold the pro-
jector’s handle when you press the
elevator’s quick release button.
To lower the projector:
1Hold the projector’s handle.
2Press the elevator’s quick release button.
3Lower the projector.
4If necessary, use the leveling knob (Figure 24) to readjust the
angle of the projected image.