InFocus 210, 220 manual Cable

S e t t i n g u p t h e P r o j e c t o r

CAUTION: Your video player may also have a “Video Out” port for a coaxial cable connection. DO NOT use this to connect to the projector.

A/V cable S-video cable

FIGURE 16

Connecting the projector to a video player using an S-video cable and the audio con- nectors on the standard A/V cable

4Plug the A/V cable’s white connector into the left “audio out” port on your video player. Plug the cable’s red connector into the right “audio out” port on the video player (Figure 15 and Figure 16).

•If you’re using an S-video cable, the yellow connectors on the A/V cable remain unused (Figure 16).

5Plug the A/V cable’s other white and red connectors to the left and right “audio in” ports on the projector.

The projector is compatible with the three major broadcast video standards: NTSC, PAL and SECAM. It automatically adjusts to optimize its performance for the incoming video. You can also set the video standard manually from the projector’s Controls menu; see “Video Standard” on page 39.

18