
|
|
| 35 |
8 |
|
| Novell NetWare Driver Installation |
Overview |
|
| |
I/OHIGHWAY will support Novell NetWare 386 V4.XX or V3.1X with the addition of a | |||
software driver. | The installation procedure described here requires some experience in | ||
Novell system | setup and administration. The device driver is transferred from the INI- | ||
9XXXU/9XXXUW DRIVER DISK 1 to the hard drive where it is automatically initialized | |||
| during the system boot routine. The device drivers listed can support NetWare versions | ||
| described after the Initio file name: |
| |
| \NETWARE\V31X\INI910U.DSK | Initio Novell adapter driver for V3.1X | |
| \NETWARE\V31X\ASPITRAN.DSK | ASPI transport layer driver for V3.1X | |
| \NETWARE\V4X\INI910U.DSK | Initio Novell adapter driver for V4.X or later | |
| \NETWARE\V4X\INI910U.DDI | Device driver installation file | |
| \NETWARE\V4X\ASPITRAN.DSK | ASPI transport layer driver for V4.X or later | |
| \NETWARE\HAM\INI9100.HAM | HAM device driver | |
| \NETWARE\HAM\INI9100.DDI | HAM device driver installation file |
Installation
The drivers developed by Initio for NetWare will be installed on the disk drive used for NetWare system initialization. It is strongly recommended that the selected procedure be read and understood before continuing with the system configuration or change. Please read the instructions carefully.
New IntraNetWare Installation
Drivers for the Initio host adapter may be found on the
1At the
e.g., d:\ <ENTER>
2Type INSTALL <ENTER> to initialize the installation routine
3 Select installation Language. <ENTER>.
4 Select NetWare Server Installation <ENTER>
5 Select product type <ENTER>