26
initio
®
Updating the Initio Windows 95/95a Device Driver
1Once a Windows 95 session is established, use your installed mouse or the appropri-
ate key strokes to select MY COMPUTER from the Main Desktop. Execute the
following steps:
 Select CONTROL PANEL from within the MY COMPUTER group.
 Select SYSTEM from within the CONTROL PANEL group.
2 Select the DEVICE MANAGER tab from within the SYSTEM group.
 Select the SCSI CONTROLLERS category from within the DEVICE MANAGER
listing.
 Select one of the Initio INI-9XXXU/UW PCI SCSI Host Adapter sub-categories
from within the SCSI CONTROLLERS listing (or select any other INI-9100U/UW
class of drivers if you are using an older Initio board).
 In the INI-9XXX SCSI HOST ADAPTER PROPERTIES window, select the DRIVER tab,
then select CHANGE DRIVER....
 In the SELECT DEVICE window, select HAVE DISK....
3In the INSTALL FROM DISK window, enter the Initio Driver path name:
 Insert the INI-9XXXU/9XXXUW DRIVER DISK 1 into drive A:
 Type: A:\WIN95, select OK
4Select Initio INI-9XXXU/UW PCI SCSI Host Adapter, select OK to install the
INI910U.MPD driver onto your hard disk drive.
It may be necessary to direct Windows to look for the driver in A:\win95 before the driver can be copied.
This step may need to be repeated more than once.
This completes updating the Host Adapter Driver. Follow the on-screen directions to
restart you computer and activate the new driver.
It is highly recommended that you verify Initios Windows 95 device driver by selecting
MY COMPUTER from the desktop. Then select CONTROL PANEL:
 Select SYSTEM from within the CONTROL PANEL group,
 Select DEVICE MANAGER from within the SYSTEM group,
 Select SCSI CONTROLLER from within the DEVICE MANAGER listing, and
 Select the Initio INI-9XXXU/UW PCI SCSI Host Adapter from within the SCSI
CONTROLLER listing. If This device is working properly is displayed on your
screen, the driver has been correctly installed.
Microsoft Windows 95/95b (OSR2) Driver Installation