Inova CompactPCI J1/J2 Connector, CompactPCI Connector, ICP-PIII Connector J1 and J2

ICP-PIIIInterfaces

®CompactPCI

3.0 CompactPCI J1/J2 Connector

The CompactPCI standard is electrically identical to the PCI local bus standard but has been en- hanced to support rugged industrial environments and up to 8 slots. The standard is based upon a 3U board size and uses a rugged pin-in-socket hard 2mm connector (IEC-1076-4-101.)

3.01 CompactPCI Connector

Figure 3.01 The 32-Bit CompactPCI Bus Interface Connector

1 11 15 25

e

d

c

b

a

PCB

3.02 ICP-PIII Connector J1 and J2

Inova’s ICP-PIII CPU board has been designed as a 32-bit system slot device able to operate in either +5V or +3.3V (I/O) systems. The CompactPCI backplane connector is keyed accordingly (yellow for +3.3V and blue for +5V.)

Note:

Do not remove the keys. An I/O board operating at 5.0V and keyed accordingly will cause a 3.3V configured system to fail if the keys are removed.

3

Doc. PD00581013.004 ©2002 Inova Computers GmbH Page3-3