B1.3 IPM-ATA-CF
The IPM-ATA-CF has provision for one or two standard Compact FLASH or MicroDrive devices. Figure B1.3 illustrates the significant connectors for this device while Table B1.3 indicates the jumper settings for the various Master/Slave device configurations.
Figure B1.3 IPM-ATA-CF Board Layout
1
2
3
B
Table B1.3 IPM-ATA-CF Jumper Description
Compact FLASH | |
or MicroDrive in J3 | Jumper J6 |
Master | Slave | |
| | |
X | - | 2-3 |
- | X | Open |
| | |
- | - | - |
| | |
Compact FLASH | |
or MicroDrive in J4 | Jumper J7 |
Master | Slave | |
| | |
X | - | 2-3 |
- | X | Open |
| | |
- | - | - |
| | |
It should be noted that the secondary IDE channel only is available for use by the IPB-ATA-CF (the primary is on the CPU board itself). A Master device must be present either in the form of an external hard-disk, Compact FLASH, MicroDrive or CD-ROM etc. Slave only configurations and multi Master configurations are not supported and will not work!
CPUAppendix-B | ©2001 Inova Computers GmbH | PageB-5 |
