B1.2 IPM-ATA-HD
The IPM-ATA-HD has provision for one standard notebook (2.5”) EIDE device (FLASH or hard-disk) and one Compact FLASH or MicroDrive site. Figure B1.2 illustrates the significant connectors for this device while Table B1.2 indicates the jumper positions for the various Master/Slave device configurations.
Figure B1.2 IPM-ATA-HD Board Layout
1
2
3
Table B1.2 IPM-ATA-HD Jumper Description
Compact FLASH | |
or MicroDrive in J3 | Jumper J6 |
Master | Slave | |
| | |
X | - | 2-3 |
- | X | Open |
| | |
- | - | - |
| | |
It should be noted that the secondary IDE channel only is available for use by the IPB-ATA-HD (the primary is on the CPU board itself). A Master device must be present either in the form of a hard- disk, Compact FLASH, MicroDrive or CD-ROM etc. Slave only configurations and multi Master configurations are not supported and will not work!
PageB-4 | ©2001 Inova Computers GmbH | CPUAppendix-B |
