Manuals / Intel / Computer Equipment / Switch

Intel 1000LX, 1000SX manual Stack Mode, Cabling to a Matrix Module in a group of switches

Models: 1000LX 1000SX

1 30

Download 30 pages 17.35 Kb

Page 15

Cabling to a Matrix Module in a group of switches

C H A P T E R 3 Configure the module and connect the cables

Cabling to a Matrix Module in a group of switches

Stack Mode

The 1000Base Module is installed in a different switch from the Ma- trix Module, so the cabling process is in two parts; the switch contain- ing the 1000Base Module must be connected to the group, then the high-speed link between this group and another group or device is es- tablished.

1Plug the Stacking Cable (Intel Order Code: ES500SC) into the Stack Interface Module connector on the 1000Base Module, and secure it using the latches on the connector.

1000SX Module for 500 Series Switches

CLASS 1 LASER PRODUCT

1000Base-SX

Stack Interface Module

1717

2Plug the other end of the Stacking Cable into the Matrix Mod- ule, and secure it using the latches on the connector.

3Plug a second Stacking Cable into the 1000Base-SX/1000Base- LX SIM connector on the 1000Base Module, and secure it using the latches on the connector.

1000SX Module for 500 Series Switches

CLASS 1 LASER PRODUCT

1000Base-SX

Stack Interface Module

1718

4Plug the other end of the Stacking Cable in to the Matrix Mod- ule, and secure it using the latches on the connector.

12

Image 15

Intel 1000LX, 1000SX manual Stack Mode, Cabling to a Matrix Module in a group of switches

Contents

User Guide 1000SX Module and 1000LX Module for 500 Series Switches1000SX Module and 1000LX Module for 500 Series Switches User Guide715236-001 715236-001 Year 2000 capableFirst edition OctoberLASER PRODUCT Quick StartCLASS LASER PRODUCT CLASSNaming in this Quick Start This Quick Start covers two products 5 Turn on the switch Conﬁgure and cable the Configure the module using Intel Device View and cable up using 1000SX and 1000LX Modules Introduction Module LEDs StatusIndicates Page automatically saved and Intel Device View resets the Conﬁgure the module and connect the cablesThe configuration and cabling of the 1000Base Module are very Note When the module mode is changed, the conﬁguration isC H A P T E R 3 Configure the module and connect the cables Conﬁguring the ModuleStand-alone Mode Cabling the ModuleCabling to a Matrix Module in a group of switches Stack ModeNote Redundancy is not possible with the 510T 3 Plug the other end of the Stacking Cable into an empty port on the Matrix Module located on the same side of the switch for example, both modules in Slot A, and secure it using the latches on the connector Introduction Prevent network loops Link Aggregation with Two Modulesules in Slot A Server Page Speciﬁcations 62.5 μm 62.5 μm MMF up to 550 m 1804 ft†Limited Hardware Warranty Limited Hardware WarrantyReturning a Defective Product RMA Returning a Defective Product RMA Limited Hardware Warranty Europe onlyA P P E N D I X A Limited Hardware Warranty LIMITATION OF LIABILITY AND REMEDIESNumber A Limited Hardware WarrantyA P P E N D CountryManufacturer Declaration WARNING Fiber-optic ports on 1000SX-Optical SafetyWARNING Fiber-optic ports on 1000LX-Optical Safety Federal Communications Commission FCC StatementAVERTISSEMENT WARNUNGA P P E N D I X A Limited Hardware Warranty AVVERTENZA ADVERTENCIASA P P E N D I X A Limited Hardware Warranty Country Automated SupportCustomer Support Technicians North America only