Intel 1000SX, 1000LX manual Turn on the switch

C H A P T E R 1 Quick Start

3Remove the plate covering expansion slot A, unless the switch is in or to be used in a stack with redundancy.

Note For a stack with redundancy, install the module on the same side of the switch as the Matrix Module it is to be connected to. When possible, do not install the module in the same switch as a Matrix Module. This prevents having a single point of failure.

When using this module in stand-alone mode, do not install it in the same switch as a Stack Interface Module, Matrix Module or another 1000Base Module in stack mode.

Slot A

1

2

3

Slot B 4

5

6

7

8

Intel
550FExpress
Switch
Status
Temper	ature
RPS		Power
		Reset
		Console
		9600-
		8-N-1

1704

4Insert the 1000Base Module into the slot. Place your thumbs just beneath the screws on the front panel of the module and push it in until it clicks. Secure the module using the retaining screws.

Slot A

1

2

3

Slot B 4

5

6

7

8

Intel
550FExpress
Switch
Status
TemperatureRPS	Power
	Reset
	Console
	9600-
	8-N-1

1715

5Turn on the switch.

3