Manuals / Intel / Computer Equipment / Switch

Intel 1000LX, 1000SX manual

Models: 1000LX 1000SX

1 30

Download 30 pages 17.35 Kb

Page 17

3Plug the other end of the Stacking Cable into an empty port on the Matrix Module located on the same side of the switch (for example, both modules in Slot A), and secure it using the latches on the connector.

C H A P T E R 3 Configure the module and connect the cables

3Plug the other end of the Stacking Cable into an empty port on the Matrix Module located on the same side of the switch (for example, both modules in Slot A), and secure it using the latches on the connector.

4The Stack Interface Module in the other slot on this switch must be plugged into the same port number in the other Matrix Mod- ule (for example, both modules in slot B), and secured using the latches on the connector.

5Plug a second Stacking Cable into the 1000Base-SX/1000Base- LX SIM connector on the 1000Base Module, and secure it using the latches on the connector.

1000SX Module for 500 Series Switches

CLASS 1 LASER PRODUCT

1000Base-SX

Stack Interface Module

1718

6Plug the other end of the Stacking Cable into an empty port on the Matrix Module located on the same side of the switch (both modules in Slot A), and secure it using the latches on the con- nector.

14

Image 17

Intel 1000LX, 1000SX manual

Contents

User Guide 1000SX Module and 1000LX Module for 500 Series Switches715236-001 1000SX Module and 1000LX Module for 500 Series SwitchesUser Guide First edition Year 2000 capableOctober 715236-001CLASS LASER PRODUCT Quick StartCLASS LASER PRODUCTNaming in this Quick Start This Quick Start covers two products 5 Turn on the switch Conﬁgure and cable the Configure the module using Intel Device View and cable up using 1000SX and 1000LX Modules Introduction Indicates Module LEDsStatus Page The configuration and cabling of the 1000Base Module are very Conﬁgure the module and connect the cablesNote When the module mode is changed, the conﬁguration is automatically saved and Intel Device View resets theC H A P T E R 3 Configure the module and connect the cables Conﬁguring the ModuleStand-alone Mode Cabling the ModuleCabling to a Matrix Module in a group of switches Stack ModeNote Redundancy is not possible with the 510T 3 Plug the other end of the Stacking Cable into an empty port on the Matrix Module located on the same side of the switch for example, both modules in Slot A, and secure it using the latches on the connector Introduction Prevent network loops Link Aggregation with Two Modulesules in Slot A Server Page Speciﬁcations 62.5 μm 62.5 μm MMF up to 550 m 1804 ft†Returning a Defective Product RMA Limited Hardware WarrantyLimited Hardware Warranty A P P E N D I X A Limited Hardware Warranty Limited Hardware Warranty Europe onlyLIMITATION OF LIABILITY AND REMEDIES Returning a Defective Product RMAA P P E N D A Limited Hardware WarrantyCountry NumberWARNING Fiber-optic ports on 1000LX-Optical Safety WARNING Fiber-optic ports on 1000SX-Optical SafetyFederal Communications Commission FCC Statement Manufacturer DeclarationA P P E N D I X A Limited Hardware Warranty AVERTISSEMENTWARNUNG A P P E N D I X A Limited Hardware Warranty AVVERTENZAADVERTENCIAS Customer Support Technicians Automated SupportNorth America only Country