Manuals / Intel / Computer Equipment / Switch

Intel 1000SX, 1000LX manual Speciﬁcations

Models: 1000LX 1000SX

1 30

Download 30 pages 17.35 Kb

Page 22

Speciﬁcations

4

Speciﬁcations

1000SX Physical	The 1000SX Module has the following specifications:
speciﬁcation

	Number of ports:	Three: 2 x Stack Interface Module
		and 1 x 1000Base-SX

	Connector Types:
	Stack Interface Module	26-position shielded plug
	1000Base-SX	Duplex SC

	Cable Types:
	Stack Interface Module	Stacking Cable (ES500SC)
	1000Base-SX	50 μm multi-mode ﬁber (MMF)
		62.5 μm multi-mode ﬁber (MMF)

	Link Lengths:
	Stack Interface Module	1 meter (39 inches)
	1000Base-SX	50 μm MMF up to 550 m (1804 ft)
		62.5 μm MMF up to 275 m (902 ft)

	Default Settings:	Stack mode
		Auto-negotiation: enabled
		Spanning Tree: disabled

	Dimensions	Width: 149mm (5.9in.)
		Height: 37mm (1.5in.)
		Depth: 238mm (9.4in.)

	Weight (approximate)	0.235kg (0.63 lb)

19

Image 22

Intel 1000SX, 1000LX manual Speciﬁcations

Contents

1000SX Module and 1000LX Module for 500 Series Switches User GuideUser Guide 1000SX Module and 1000LX Module for 500 Series Switches715236-001 October Year 2000 capableFirst edition 715236-001CLASS Quick StartCLASS LASER PRODUCT LASER PRODUCTNaming in this Quick Start This Quick Start covers two products 5 Turn on the switch Conﬁgure and cable the Configure the module using Intel Device View and cable up using 1000SX and 1000LX Modules Introduction Status Module LEDsIndicates Page Note When the module mode is changed, the conﬁguration is Conﬁgure the module and connect the cablesThe configuration and cabling of the 1000Base Module are very automatically saved and Intel Device View resets theConﬁguring the Module C H A P T E R 3 Configure the module and connect the cablesCabling the Module Stand-alone ModeStack Mode Cabling to a Matrix Module in a group of switchesNote Redundancy is not possible with the 510T 3 Plug the other end of the Stacking Cable into an empty port on the Matrix Module located on the same side of the switch for example, both modules in Slot A, and secure it using the latches on the connector Link Aggregation with Two Modules Introduction Prevent network loopsules in Slot A Server Page Speciﬁcations 62.5 μm MMF up to 550 m 1804 ft† 62.5 μmLimited Hardware Warranty Limited Hardware WarrantyReturning a Defective Product RMA LIMITATION OF LIABILITY AND REMEDIES Limited Hardware Warranty Europe onlyA P P E N D I X A Limited Hardware Warranty Returning a Defective Product RMACountry A Limited Hardware WarrantyA P P E N D NumberFederal Communications Commission FCC Statement WARNING Fiber-optic ports on 1000SX-Optical SafetyWARNING Fiber-optic ports on 1000LX-Optical Safety Manufacturer DeclarationWARNUNG AVERTISSEMENTA P P E N D I X A Limited Hardware Warranty ADVERTENCIAS AVVERTENZAA P P E N D I X A Limited Hardware Warranty North America only Automated SupportCustomer Support Technicians Country