AC450NX Rack Server System Product Guide
124
OM07357
A
Figure 12-5. PCI Bus Hot-Plug Cover

Reinstalling the PCI Bus Hot-Plug Cover

See Figure 12-5.
1. Ensure that add-in boards are firmly seated in their respective slots.
2. Position the cover over the top cover so that the tabs along its edges align with the slots in the
top cover.
3. Lower the cover until it rests on the top cover.
4. Push the cover toward the server front to seat the tabs along the cover front with the top cover.
5. Attach the cover to the top cover with the two screws, and tighten them firmly
(6.0 inch-pounds).