Chapter 13 Server Components: Removing/Reinstalling
157
12. Reinstall all PCI hot plug expansion slot power switch activators and covers in their original
positions.
13. Reinstall the top and PCI bus regular slot covers as described in Chapter 12.
14. Connect all peripheral device cables that go to the I/O panel on the rear of the system.
15. Run the SSU, and use the saved configuration file to restore all options to the same settings.
For information about running this utility, see Chapter 5, “System Setup Utility: When to
Run.”
OM07317
= A
= B
Figure 13-17. PHP I/O Baseboard
A. Snap-on standoffs (two)
B. Screws (thirteen)