Intel AC450NX Peripheral Bay

Chapter 13 Server Components: Removing/Reinstalling
159
Reinstalling the AC Filter and Cable
1. Remove the AC filter and cable from the antistatic protective wrapper if you placed it in one.
2. Lay the cable in position inside the chassis.
3. Reinstall the three plug retaining brackets and secure with screws.
4. Reinstall the AC filter tray.
5. Reinstall the I/O Tray as described earlier.
6. Reinstall the CPU baseboard tray as described earlier.
7. Reinstall the top cover as described in Chapter 12, “Server Covers: Removing/Reinstalling.”
Peripheral Bay
Removing the Peripheral Bay
See Figure 13-18
1. Observe the precautions on page 115, “Safety Guidelines.”
2. Remove the top and memory module covers as described in Chapter 12, “Server Covers:
Removing/Reinstalling.”
3. Remove and save the four screws that secure the peripheral bay to the chassis.
4. Grab the CPU baseboard tray support and pull the peripheral bay from the chassis.
Reinstalling the Peri pheral Bay
See Figure 13-18
1. Observe the precautions on page 115, “Safety Guidelines.”
2. Place the peripheral bay into position and push into place using the CPU baseboard tray
support.
3. Ensure that the CPU baseboard tray support engages with the CPU baseboard tray.
4. Install the four securing screws removed earlier.
5. Reinstall the top and memory module covers as described in Chapter 12, “Server Covers:
Removing/Reinstalling.”