AC450NX Rack Server System Product Guide
168

CD-ROM Drive

The server comes with an CD-ROM drive installed in the peripheral bay. Contact your sales
representative or dealer for a list of approved add-in devices.

Removing the CD-ROM Drive

See Figures 14-2, and 14-3.
1. Observe the precautions on page 115, “Safety Guidelines.”
2. Remove the peripheral bay as described in Chapter 13, “Server Components:
Removing/Reinstalling.”
3. Disconnect the power and the signal cables from the CD-ROM drive.
4. Squeeze the tabs on the plastic snap-in slide rails toward the drive to release it. Pull the drive
out of the bay until you can access its power and signal cables.
5. Remove and save the four screws and the two snap-in slide rails from the drive.