Chapter 12 Server Covers: Removing/Reinstalling
125

Removing the Fan Array Assembly Cover

1. Observe the precautions on page 115, “Safety Guidelines.”
2. Remove the front bezel as described earlier.
3. Remove the top cover as described earlier.
4. Remove and save the screw that secures the fan array assembly cover to the chassis.
5. Slide the cover forward to free it from the securing tab.
6. Remove the cover.

Reinstalling the Fan Array Assembly Cover

1. Observe the precautions on page 115, “Safety Guidelines.”
2. Place cover in position over the fan array. Ensure that the tabs interlock with the fan array
assembly.
3. Lower cover and slide it to the rear so that it engages locking tabs.
4. Secure the cover screw removed earlier.
5. Reinstall the top cover as described earlier.
6. Reinstall the front bezel as described earlier.

Removing the Memory Module Cover

See Figure 12-6.
1. Observe the precautions on page 115, “Safety Guidelines.”
2. Remove the front bezel as described earlier.
3. Loosen the four captive screws securing the memory module cover and remove the cover.