Intel AC450NX The following information is display if -v option is included in the command line.

Chapter 8 FRU and SDR Load Utility: When to Run
91
Copyright (c) 1998, Intel Corporation, All Rights Reserved
This utility must be run from a system executing DOS. Running in a Window’s
DOS box is insufficient and will provide incorrect results. Programming the
BMC FRU area clears the SDR table, therefore the SDR table must be
reprogrammed. Upon completing the programming of the FRU and SDR areas, the
server should be rebooted.
Note: DOS users may alternatively use a ’/’ instead of the ’-’.
The following information is display if -v option is included in the command line.
The /D FRU command may be followed with up to 16 device addresses. These
device addresses are used to view up to 16 different FRU areas, instead of
the default of displaying the BMC FRU. The arguments following the "-d FRU"
are in the same order and value as the NVS_TYPE, NVS_LUN, DEV_BUS and
DEV_ADDRESS which are found in the FRU file header in each FRU file. The
LUN address is optional. If the LUN address is used, it must start with
an ’L’.
Usage: FRUSDR -d fru (device) [lun] (bus) (addr) (addr2) (etc)
Example: FRUSDR /D FRU IMBDEVICE L00 00 C0 C2
The configuration file may be used to load multiple FRU and SDR files.
In the configuration file, you may define which FRU and SDR areas are to
be programmed. Additionally, you may request information from the user
or ask the user to choose which areas to program.
To read this area Enter this command line
I/O Baseboard FRU frusdr -d fru IMBDEVICE FF 20
Front Panel FRU frusdr -d fru IMBDEVICE 00 22
CPU baseboard FRU frusdr -d fru DS1624S 01 98
Top Mem Mod FRU frusdr -d fru DS1624S 01 9A
Bottom Mem Mod FRU frusdr -d fru DS1624S 01 9E
Interconnect Backplane FRU frusdr -d fru AT24C02 01 A2
I/O Riser FRU frusdr -d fru AT24C02 01 AE
Power Distribution Backplane FUR frusdr -d fru IMBDEVICE L02 00 22
SCSI Hot Swap Backplane FRU frusdr -d fru IMBDEVICE 00 C0
Term card in Slot 1 frusdr -d fru AT24C02 03 A0
Term card in Slot 2 frusdr -d fru AT24C02 03 A4
Term card in Slot 3 frusdr -d fru AT24C02 03 A8
Term card in Slot 4 frusdr -d fru AT24C02 03 AC