Chapter 7 LANDesk User Guide
6.11 Supervisor / User Password
These two options set the system password. Supervisor Password sets a password that will be used to protect the system and Setup utility. User Password sets a password that will be used exclusively on the system. To specify a password, highlight the type you want and press <Enter>. The Enter Password: message prompts on the screen. Type the password, up to eight characters in length, and press <Enter>. The system confirms your password by asking you to type it again. After setting a password, the screen automatically returns to the main screen.
To disable a password, just press the <Enter> key when you are prompted to enter the password. A message will confirm the password to be disabled. Once the password is disabled, the system will boot and you can enter Setup freely.
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
STANDARD CMOS SETUP |
| INTEGRATED PERIPHERALS | ||
BIOS FEATURES SETUP |
| SUPERVISOR PASSWORD | ||
CHIPSET FEATURES SETUP |
| USER PASSWORD | ||
POWER MANAGEMENT SETUP |
| IDE HDD AUTO | DETECTION | |
| ||||
PNP/PCI CONFIGURATION |
| HDD LOW LEVEL | FORMAT | |
| Enter Password: |
| ||
LOAD BIOS DEFAULTS |
| SAVE & EXIT SETUP | ||
LOAD SETUP | DEFAULTS |
| EXIT WITHOUT | SAVING |
|
|
|
|
|
ESC : Quit |
| Ç È Æ Å : Select Item | ||
F10 : Save & Exit Setup |
| (Shift) F2 : Change Color |
Change / Set / Disable Password
AI5VG Pentium VP3 Baby AT Motherboard User’s Manual | 51 |