Electrical Specifications
72 Datasheet
7.5.3.1 PCI Express* DC Specifications
The processor DC specifications for the PCI Express* are available in the PCI Express
Base Specification, Revision 3.0. This document will provide only the processor
exceptions to the PCI Express Base Specification, Revision 3.0.
7.5.3.2 DMI2/PCI Express* DC Specifications
The processor DC specifications for the DMI2/PCI Express* are available in the PCI
Express Base Specification, Revisions 2.0 and 1.0. This document will provide only the
processor exceptions to the PCI Express Base Specification, Revisions 2.0 and 1.0.
7.5.3.3 Reset and Miscellaneous Signal DC Specifications
For a power-on Reset, RESET_N must stay active for at least 3.5 millisecond after VCC
and BCLK{0/1} have reached their proper specifications. RESET_N must not be kept
asserted for more than 100 ms while PWRGOOD is asserted. RESET_N must be held
asserted for at least 3.5 millisecond before it is de-asserted again. RESET_N must be
held asserted before PWRGOOD is asserted. This signal does not have on-die
termination and must be terminated on the system board.
§ §