Intel user manual ECB-865User’s Manual, Controller interface test command next

ECB-865

Code	Description
81	A keyboard reset error or stuck key was found. Issuing the keyboard
	Controller interface test command next.
82	The keyboard controller interface test completed. Writing the
	command byte and initializing the circular buffer next.
83	Command byte written, Global data init done. To check for lock-key.
84	Locked key checking is over. Checking for a memory size mismatch
	with CMOS RAM data next.
85	The memory size check is done. Displaying a soft error and checking
	for a password or bypassing Setup next.
86	Password checked. About to do programming before setup.
87	The programming before Setup has completed. Uncompressing the
	Setup code and executing the AMIBIOS Setup utility next.
88	Returned from CMOS setup program and screen is cleared. About to
	do programming after setup.
89	The programming after Setup has completed. Displaying the power on
	Screen message next.
8B	The first screen message has been displayed. The <WAIT…>
	message is displayed. Performing the PS/2 mouse check and
	extended BIOS data area allocation check next.
8C	Programming the Setup options next.
8D	Going for hard disk controller reset.
8F	Hard disk controller reset done. Floppy setup to be done next.
91	The floppy drive controller has been configured. Configuring the hard
	disk drive controller next.
95	Initializing the bus option ROMs from C800 next.
96	Initializing before passing control to the adaptor ROM at C800.
97	Initialization before the C800 adaptor ROM gains control has
	completed. The adaptor ROM check is next.
98	The adaptor ROM had control and has now returned control to BIOS
	POST. Performing any required processing after the option ROM
	returned control.
99	Any initialization required after the option ROM test has completed.
	Configuring the timer data area and printer base address next.

ECB-865 User’s Manual 101