5.Driver Installation
5.1Driver Installation for Ethernet Adapter
5.1.1Windows 9x
The best way to install the driver for the Ethernet controller is to use the plug and play system of Windows 9x. The following procedures illustrate how the installation can be done.
1.If a driver for the Ethernet controller is already installed, it must be removed first. This can be done by following the steps shown below.
•Click the ‘Start’ button, click on ‘Settings’ and on ‘Control panel’ to open the control panel. Your display should now look as below (possibly with different size and icons):
•Double click the ‘System’ icon (highlighted above).
•Select the ‘Device Manager’ tab.
