Appendix C: POST Error Code | Intel® Compute Module MFS2600KI TPS |
Appendix C: POST Error Code
Most error conditions encountered during POST are reported using POST Error Codes. These codes represent specific failures, warnings, or informational messages that are identified with particular hardware units. These POST Error Codes may be displayed in the Error Manager display screen, and are always automatically logged to the System Event Log (SEL). The table below lists the supported POST Error Codes, with a descriptive Error Message text. For each, There is also a Response listed, which classifies the error as Minor, Major, or Fatal depending on how serious the error is and what action the system should take. The Response section in the following table indicates one of these actions:
Minor: The message is displayed on the screen or on the Error Manager screen, and an error is logged to the SEL. The system continues booting in a degraded state. The user may want to replace the erroneous unit. The POST Error Pause option setting in the BIOS setup does not have any effect on this error.
Major: The message is displayed on the Error Manager screen, and an error is logged to the SEL. The POST Error Pause option setting in the BIOS setup determines whether the system pauses to the Error Manager for this type of error so the user can take immediate corrective action or the system continues booting.
Fatal: The system halts during post at a blank screen with the text “Unrecoverable fatal error found. System will not boot until the error is resolved” and “Press <F2> to enter setup” The POST Error Pause option setting in the BIOS setup does not have any effect with this class of error.
Table 30. POST Error Codes and Messages
Error Code | Error Message | Response |
0012 | System RTC date/time not set | Major |
|
|
|
0048 | Password check failed | Major |
|
|
|
0140 | PCI component encountered a PERR error | Major |
|
|
|
0141 | PCI resource conflict | Major |
|
|
|
0146 | PCI out of resources error | Major |
|
|
|
0191 | Processor core/thread count mismatch detected | Fatal |
|
|
|
0192 | Processor cache size mismatch detected | Fatal |
0194 | Processor family mismatch detected | Fatal |
|
|
|
0195 | Processor Intel® QPI link frequencies unable to synchronize | Fatal |
0196 | Processor model mismatch detected | Fatal |
|
|
|
0197 | Processor frequencies unable to synchronize | Fatal |
|
|
|
5220 | BIOS Settings reset to default settings | Major |
|
|
|
5221 | Passwords cleared by jumper | Major |
|
|
|
5224 | Password clear jumper is Set | Major |
|
|
|
8130 | Processor 01 disabled | Major |
|
|
|
8131 | Processor 02 disabled | Major |
|
|
|
8132 | Processor 03 disabled | Major |
|
|
|
8133 | Processor 04 disabled | Major |
|
|
|
8160 | Processor 01 unable to apply microcode update | Major |
|
|
|
8161 | Processor 02 unable to apply microcode update | Major |
|
|
|
8162 | Processor 03 unable to apply microcode update | Major |
|
|
|
50 | Intel Confidential | Revision 1.0 |
| Intel order number: |
|