5. CONFIGURATION
First make sure that the network connections are functioning normally.
This Wireless Super G Router can be configured using Internet Explorer 5.0 or newer Web browser versions.
LOGIN TO THE ROUTER THROUGH A WIRELESS LAN
Before configuring the router through a WLAN, make sure that the SSID, Channel and WEP are set properly.
Following are the default settings used for the Wireless Super G Router:
•SSID: default
•Channel: 6
•Security: disable
LOGIN TO THE WIRELESS SUPER G ROUTER
Before you configure this device, make sure the host PC is set on the IP subnetwork that can be accessed by the xDSL/cable modem. For example, when the default network address of the xDSL/cable modem Ethernet interface is 192.168.1.x, then the host PC should be set at 192.168.1.xxx (where xxx is a number between 2 and 254) and the default subnet mask is 255.255.255.0.
USING THE WEB BROWSER
1.Open Internet Explorer 5.0 or above (or equivalent Internet browser).
2.Enter the IP address http://192.168.1.1 (the
3.When the following dialog box appears, enter the username and password to login to the main configuration window. The default username and password are “admin.”
14
CONFIGURATION