Delete: Select one of the entries in the static IP address table at the bottom of the page and click “Delete” to remove the entry.
New: Click “New” to clear the text boxes and add required information to create a new entry.
Dynamic
This screen enables the user to set NAT parameters.
NAT: Click the radio buttons to enable or disable the NAT function.
Transmit: Click the radio buttons to set the desired transmit parameters:
Disabled, RIP 1 or RIP 2.
Receive: Click the radio buttons to set the desired
receive parameters: Disabled, RIP 1 or RIP 2.
Routing Table
This screen enables the user to view the routing table for the router. The routing table is a database created by the router that displays the network interconnection topology.
Network Address: Displays the network IP address of the connected node.
Network Mask: Displays the network (subnet) mask of the connected node.
Gateway Address: Displays the gateway address of the connected node.
Interface: Displays whether the node is connected via a WAN or LAN.
Metric: Displays the metric of the connected node.
Type: Displays whether the node has a static or dynamic IP address.
Access
This page enables you to define access restrictions; set up protocol and IP filters; create virtual servers; define access for special applications, such as games; and set firewall rules.
CONFIGURATION
29
