Intellinet Network Solutions 524780 user manual ParameterDescription

to share routes because all Internet data from the network is sent to the same ISP gateway.

You may want to configure RIP if any of the following circumstances apply to your network:

•Your home network setup includes an additional router or RIP-enabled PC (other than this one). This router and the other router will need to communicate via RIP to share their routing tables.

•Your network connects via the ADSL line to a remote network, such as a corporate network. In order for your LAN to learn the routes used within your corporate network, they should both be configured with RIP.

•Your ISP requests that you run RIP for communication with devices on their network.

ParameterDescription

RIP

Interface

Receive Mode

Send Mode

Enable/disable the RIP feature.

Select the interface that you want to enable the RIP feature.

Indicate the RIP version in which information must be passed to the DSL device in order for it to be accepted into its routing table.

Indicate the RIP version this interface will use when it sends its route information to other devices.

40