Destination | The destination can be specified as the IP address of a |
| subnet or a specific host in the subnet. It can also be |
| specified as all zeros to indicate the route should be used |
| for all destinations for which no other route is defined |
| (this is the route that creates the default gateway). |
Subnet Mask | The network mask of the destination subnet. The default |
| gateway uses a mask of 0.0.0.0. |
Next Hop | The IP address of the next hop through which traffic will |
| flow toward the destination subnet. |
Metric | Defines the number of hops between network nodes that |
| data packets travel. The default value is 0, which means |
| that the subnet is directly one hop away on the local LAN |
| network. |
Interface | The WAN interface to which a static routing subnet is to |
| be applied. |
Show Routes | Click to view the router’s routing table. |
Static Route Table | Click “Update” to update the selected destination route in |
| the Static Route Table. Click “Delete Selected” to delete |
| a selected destination route in the table. |
When you finish, click “Apply Changes.” You’ll see the following message displayed on Web browser.
Click “Continue” to save the settings made and go back to the Web management interface; click “Apply” to save the settings made and restart the router so the settings will take effect after it reboots.
73
