Precedence

Select this field to mark the IP precedence bits in the

 

packet that match this classification rule.

TOS

The IP (Internet Protocol) uses the ToS (Type of Service)

 

field to provide an indication of the quality of service

 

desired. These parameters are to be used to guide the

 

selection of the actual service parameters when

 

transmitting an IP datagram through a particular network.

IP QoS Rules

This table lists the rules you have configured. Click

 

“Delete Selected” to delete the selected rules or click

 

“Delete All” to delete all the rules.

When you finish, click “Apply Changes.” You’ll see the following message displayed on Web browser.

Click “Continue” to save the settings made and go back to the Web management interface; click “Apply” to save the settings made and restart the router so the settings will take effect after it reboots.

5.2.6 NAT (Network Address Translations)

NAT (network address translations) solve the problem of sharing a single IP address among multiple computers. Without NAT, all computers must be assigned with a valid Internet IP address to get connected to the Internet; but Internet service providers provide only a limited number of IP addresses to each user. Therefore, it’s necessary to use NAT technology to share a single Internet IP address among multiple computers on local network so everyone can get connected.

60

Page 66
Image 66
Intellinet Network Solutions 524780 user manual NAT Network Address Translations, Tos