Intellinet Network Solutions 524780 user manual ATM Loopback

5.4.4 ATM Loopback

In order to isolate ATM interface problems, you can use ATM OAM loopback cells to verify connectivity between VP/VC endpoints, as well as segment endpoints within the VP/VC. This screen allows you to use ATM ping to test the reachability of a segment endpoint or a connection endpoint.

Parameter	Description
Select PVC	Select the PVC channel you want to do the loop-back
	diagnostic.
Flow Type	The ATM OAM flow type. The selection can be F5 Segment or
	F5 End-to-End. ATM uses F4 and F5 cell flows:
	• F4: used in VPs
	• F5: used in VCs
Loopback	The loop-back location ID field of the loop-back cell. The
Location ID	default value is all 1s (ones) to indicate the endpoint of the
	segment or connection.

Click “Go!” to save the setting to the configuration.

81