Intermec 6110 manual Condition Solution Hand-Held

SECTION 4 Troubleshooting

Table 4-1 (continued)

Basic Troubleshooting

Condition	Solution
Hand-Held	The printer may be running off
Computer Will	battery power. The printer does not
Not Turn ON	charge the battery in your computer
When Inserted In	when it is running off battery power
A Printer	itself.
The Power	The Power Status LED on the front
Status LED	panel of your hand-held computer
Starts Blinking	informs you of the status of your
	battery pack when it is connected to
	a charging device. The Power Status
	LED reads:
	Off when in a normal operating
	mode;
	Blinking red when the battery is low;
	Continuous red when charging;
	Continuous green when done
	charging;
	Blinking green when in a standby
	mode;
The Charger	The Charger Status LED on the
Status LED	external charging device, used for
Starts Blinking	charging the battery packs, informs
	you of the status of the battery pack.
	The Charging Status LED reads:
	Continuous red for charging;
	Continuous green when done
	charging;
	Blinking red when there is a bad
	connection. Lift the pack out and
	reseat. If it still blinks call Customer
	Service.

6110 Hand-Held Computer User’s Guide 4-3