Intermec 6110 manual ESC key

APPENDIX B PEN*KEYR Utilities Program

These error codes apply when COMM SETTINGS is set to

NRINET:

“0”	No error
“6”	User aborted communications by pressing
“800”	[ESC] key.
	PC TCP/IP kernel is missing.
“801”	Invalid client IP address. Make sure the entry
	for CLIENT IP ADDRESS is correct, or make
“802”	sure the DHCP server is running.
	Invalid Service or Service Type, or invalid port
“803”	number.
	Invalid host name or IP Address. Make sure
	the entry for SERVER NAME is correct, and
“804”	that the server is running.
	Could not create socket. Check all cables and
“806”	network connections.
	Block sent was incomplete or block received
“807”	was incomplete.
	Client and server negotiation failed.
“808”	Server specified an unsupported block size.
“809”	Invalid buffer pointer.
“810”	All server connections are already in use. Try
“811”	again later.
	Timeout while sending data. Connection to
	remote machine dropped. Make sure the host
	is still running, and check all cables and
“812”	network connections.
	Timeout while receiving data. Connection to
	remote machine dropped. Make sure the host
	is still running, and check all cables and
“813”	network connections.
	An attempt to send data to the server failed
	due to a closed connection. Ensure the server
	is still running, check all cables and network
“814”	connections.
	An attempt to receive data from the server
	failed due to a closed connection. Ensure the

6110 Hand-Held Computer User’s Guide B-15