Rear media slot
Media spacer
PL4U015.eps | Surface of media |
| to be printed |
5Close the media cover and then rotate the latch assembly until it locks in place.
6Turn on the printer or press the Feed button if the printer is already on.
The printer advances the media to the next label, if printing labels. If you are printing on continuous media, the printer will advance a short strip of media and will then be ready for printing.
Verifying the Printer Is Working
Before you connect the printer to your computer or portable data terminal, make sure that the printer is in proper working order. You can do this by printing a configuration label using the next procedure. If you cannot get this label to print, refer to “Troubleshooting” later in this guide.
22 | EasyCoder PL4 Printer User’s Guide |
