| Latch |
PL4U046 .eps | assembly |
4Rotate the latch assembly until it locks in place.
Loading Fanfold Media
The PL4 has a loading slot in the rear of the media compartment that allows you to use standard
To load fanfold media
1Press the latch release button on the side of the printer. The latch assembly flips open automatically.
2Rotate the media cover back to expose the media compartment and the adjustable media supports.
3Pull the media supports apart, insert a media spacer such as a label roll core or other cardboard tube between them, and let the media supports close.
4Insert the media from the external supply through the rear feed slot, between the media guides, and up through the media compartment. Make sure the side of the media you will be printing on faces the printhead.
EasyCoder PL4 Printer User’s Guide | 21 |