11Close the Bluetooth print utility, or print another label.
Wireless Local Area Network (WLAN) Communications
This section provides information about the Compact Flash radio and PCMCIA card radio and procedures for the following setup scenarios:
•LPD and TCP printing
•WEP encryption
•POP3
•Ad Hoc mode
WLAN Module Using a Compact Flash Radio
Note: The following section only applies when the CF (Compact Flash) WLAN module is installed in the PL4 printer. The FCC ID number label is on the bottom of the printer.
Use of the PL4 with the CF radio module meets the FCC requirements for radio frequency radiation exposure when worn in the standard configuration. In this configuration, which applies whether you use the belt clip or shoulder strap, the face of the printer where the media comes out is facing away from you. You must use the standard configuration when wearing the printer.
Avertissement: L’utilisation du PL4 avec le module radio CF est conforme aux exigences de la FCC en termes d’irradiation à la radiofréquence lorsque porté selon la configuration standard. Sous cette configuration, qui s’applique selon que vous portiez une pince de ceinture ou une courroie, le côté de l’imprimante d’où sort le support ne fait pas face à l’utilisateur. Il faut utiliser la configuration standard lors du port de l’imprimante.
Printers equipped for WLAN communications use the industry standard 802.11b protocols. These printers allow wireless communication as a node within a LAN, and its wireless capabilities allow communications from any point within the
32 | EasyCoder PL4 Printer User’s Guide |
