8 BACK
Removing/Installing the Back Upholstery Cover, Adjustable Tension Back Upholstery and Lumbar Strap
For this procedure, refer to FIGURE 7 on page 54 and FIGURE 8 on page 55.
If replacing the back upholstery cover, adjustable tension back upholstery and/or lumbar strap, remove the existing upholstery/lumbar strap and install the new upholstery/lumbar strap.
Removing the Back Upholstery Cover
1.Remove the seat cushion, if applicable.
2.Pull the back upholstery cover away from the adjustable tension back upholstery separating the fastening strips of the back upholstery cover from the fastening strips of the adjustable tension back upholstery and seat (Details “A” and “B”).
3.Remove back upholstery cover from wheelchair.
Removing the Adjustable Tension Back Upholstery
1.Remove the back upholstery cover. Refer to Removing the Back Upholstery Cover on page 52.
2.Slide adjustable tension back upholstery off back canes (Details “C” and “D”).
Removing the Lumbar Strap
1.Remove the back upholstery cover. Refer to Removing the Back Upholstery Cover.
2.Fold back forward. Refer to Unfolding/Folding the Back on page 43.
3.Loosen the top mounting screw but DO NOT remove (Detail “E”).
4.Remove the lower mounting screw, coved spacer, washer and locknut from each back cane (Detail “E”).
5.Slide lumbar strap off back canes (Details “D” and “E”).
Installing the Lumbar Strap
1.Install lumbar strap (Details “D” and “E”).
2.Install lower mounting screw, coved spacer, washer and locknut onto each back cane (Detail “E”).
3.Tighten the top and bottom mounting screws (Detail “E”).
Invacare®Top End Reveal™Wheelchair | 52 | Part No 1171880 |
