8BACK
8.Repeat STEPS 2-6 for remaining back cane.
WARNING
After unfolding the back, ensure that the plunger pins are fully engaged in the mounting holes of the adjustment square in the back angle plates (Detail “A”). Otherwise, serious injury could result.
9.Unfold the back until the plunger pins lock into the mounting holes in the adjustment square.
10.Unthread the placement screw until head of screw rests on seat rail (Detail “D”).
11.Completely tighten jam nut up against bottom of back cane (Detail “D”).
When adjusted properly, the back should have a small amount of movement when locked in the open position. Plunger pins should snap in and release easily without resistance.
Invacare®Top End Reveal™Wheelchair | 46 | Part No 1171880 |
