Invacare 1171880 Adjusting Quad-Release Handle In and/or Out, Removing Play from Rear Wheels

11 WHEELS

4.Tighten the locking screw.

5.Reinstall the rear wheel and quad-release axle onto the wheelchair. Refer to Removing/Installing Rear Wheels on page 66.

6.Flip the handle of the quad-release axle down to release the detent pin ensuring that the locking pins are fully released.

7.Repeat the above procedures until the quad-release axle locks correctly.

Adjusting Quad-Release Handle In and/or Out Removing Play from Rear Wheels

Locking Pins

Quad Release

Handle

Locking

Screw

Adjusting Locknut

(On Quick-Release Axle)

Camber Bar	Length
	Adjustment
	Screw
	FIGURE 4 Adjusting Quad-Release Handles

Removing Play from Rear Wheels

1.With the rear wheel and quad-release axle still mounted onto the wheelchair, make the following adjustment:

• Tighten the length adjusting screw until there is no in and out movement of the quad-release axle and rear wheel.

Part No 1171880 69 Invacare®Top End Reveal™Wheelchair