12 CASTER
Installing Fork Assembly
WARNINGUse Loctite™242 on threads fork stem when reinstalling the one sided fork into the caster housing. Otherwise, the fork may become loose and disengage from the headtube. Possible injury or damage could result.
1.Perform one of the following:
• Standard Forks - Using a locknut, secure the spectre and fork to the fork stem (Detail “A”).
Spacer orientation must be as shown in FIGURE 1.
•One Sided Fork (Detail “B”)
a.Apply Loctite 242 on stem threads.
b.Screw fork stem into caster housing. Tighten securely.
2.Install the front caster. Refer to Installing Front Caster on page 82.
DETAIL “A” - |
|
| Caster Housing |
|
STANDARD FORK |
|
|
| |
Fork |
|
|
| |
|
|
|
| |
| Stem |
|
|
|
This side is top and |
|
|
|
|
must face up |
|
| Fork Stem |
|
|
|
|
| |
|
|
| DETAIL “B” - ONE |
|
|
| Locknut | SIDED FORK |
|
| Fork |
|
| |
| (Hidden) |
|
| |
|
|
|
| |
|
| FIGURE 4 Removing/Installing the Fork Assembly |
| |
Invacare®Top End Reveal™Wheelchair |
| 84 | Part No 1171880 | |
