7 ARMS
Plunger Pin | Back Stop Insert |
Split Ring
Back Release Cord
FIGURE 1 Disconnect Back Release Cord
5.Remove the rear seat upholstery mounting screw and short mounting screw (FIGURE 2).
6.Remove the back stop insert from seat rail (FIGURE 2).
7.Perform STEPS 5-6 on remaining back stop insert.
8.Secure the back stop insert weldment to the armrest socket, in the orientation shown, with two mounting screws, four washers, and two locknuts. Tighten securely (FIGURE 3).
9.Perform STEP 8 for remaining back stop insert weldment/armrest socket.
Back Stop | Rear Seat Upholstery | |
Mounting Screw | ||
Insert | ||
|
Short
Mounting
Screw
FIGURE 2 Remove Back Stop Insert
Part No 1171880 | 37 | Invacare®Top End Reveal™Wheelchair |
