FWD WHEELCHAIRS | PROCEDURE 8 |
17.Reinstall the hex bolts, spacers, washers and locknuts that secure the (2) push brackets to the new crossbraces and tighten securely.
18.Reinstall the hex bolts, washers and locknuts that secure the pivot links to the crossbraces and tighten securely.
19.Unfold the battery tray. Refer to FOLDING BATTERY TRAY FOR USE in this procedure of the manual.
Wheelchair Frame | Hex Bolt | |
(STEPS 5, 18) | ||
| ||
Washer |
| |
(STEPS 6, 17) | Pivot Link | |
Hex Bolts |
| |
(STEPS 6, 17) |
| |
Hex Bolts |
| |
(STEPS 6, 17) |
| |
Crossbrace | Push Bracket | |
|
SpacerLocknut
Locknut (STEPS 6, 17) (STEPS 6, 17) (STEPS 5, 18)
Tie Wraps (STEPS 8, 15)
20.Reinstall the battery boxes onto the wheelchair. Refer to INSTALLING/REMOVING BATTERY BOXES in this procedure of the manual.
21.Reinstall shrouds. Refer to REMOVING/INSTALLING SHROUDS in this procedure of the manual.
22.Reinstall the Captain's seat. Refer to REMOVING/ INSTALLING CAPTAIN'S SEAT in PROCEDURE 9 of the owner's manual, part number 1080737.
Dust Cover (STEPS 7, 16)
Locknut (STEPS 8, 14)
Spacer
(STEPS 9, 13)
Hex Bolts
(STEPS 9, 14)
Pivot Tube Plug Pin (STEPS 11, 12)
DETAIL "C" - (STEPS 10, 13)
Front of
Wheelchair
Note orientation of hex bolt, washers, coved wash- ers and locknut for installation of new crossbraces.
F
W
D
W
H
E
E
L
C H A I R S
FIGURE 16 - REPLACING CROSSBRACES - CAPTAIN'S SEAT
31
