PROCEDURE 8

FWD WHEELCHAIRS

F

W

D

W

H

E

E

L

C H A I R S

Installing Side Shrouds and Fillers

1.Position side shroud and filler on the wheelchair frame.

2.Line up the mounting holes in the side shroud and filler with the mounting holes in the wheelchair frame.

CAUTION

DO NOT overtighten the phillips screws and phil- lips bolt that secure the side shroud to the wheel- chair frame - otherwise damage to the side shroud can occur.

3.Install the phillips screws, bolts, washers and locknuts that secure the side shroud and filler to the wheelchair frameandtightensecurely.DONOTOVERTIGHTEN. Refer to FIGURE 14 for phillips screw, bolt, washer and locknut locations.

4.Repeat STEPS 1-3 for the opposite side of the wheelchair, if necessary.

5.HIGH BACK CAPTAIN'S SEAT MODEL WHEEL- CHAIRS ONLY - If necessary, perform the following:

B.Reinstall the phono jack nut onto the phono jack and tighten securely.

6.Perform one (1) of the following:

A.INTEGRATED SLING SEAT MODELS - Unfold thewheelchair.RefertoTRANSPORTINGEXCEL in this procedure of the manual.

B.CAPTAIN'S SEAT MODELS - Reinstall the Captain's Seat onto the wheelchair. Refer to REMOVING/INSTALLING CAPTAIN'S SEAT in PROCEDURE 9 of the owner's manual, part number 1080737.

7.Reinstall the rear shroud onto the wheelchair. Refer to REMOVING/INSTALLING REAR SHROUD in this procedure of the manual.

8.Reinstall the front shroud onto the wheelchair. Refer to REMOVING/INSTALLING FRONT SHROUD in this procedure of the manual.

A. Position the phono jack on the side shroud.

Phillips Screws

 

 

 

 

Locknut

Phillips Screws

Side Shroud

Retaining

Strap

Rear Shroud

Washers

Wheelchair

Frame

Battery Charger

Cover

Phillips Bolts

Phono Jack

 

Front Shroud

 

Retaining Strap

Nut

 

 

 

 

Filler

 

Side

 

 

Shroud

Battery Box

Battery Tray

 

Phono Jack

FIGURE 14 - REMOVING/INSTALLING SHROUDS - FWD WHEELCHAIRS

28

Page 28
Image 28
Invacare P9000 service manual Installing Side Shrouds and Fillers, Phillips Screws Locknut, Retaining Strap