FWD WHEELCHAIRS

PROCEDURE 8

Armrest Plate

Armrest Pad

Armrest Insert

Lug Bolt

Locknuts

Phillips Screw

Locknuts

Washers

 

 

Phillips

 

 

Screw

Hex Bolts

Washers

Spacers

5.Position the mounting holes in the two (2) new seat positioning strap halves with the mounting holes in the seat frame assembly.

6.Reinstall the two (2) hex bolts, washers and locknuts that secure the seat positioning strap to the seat frame assembly and tighten securely.

7.Install the captain's seat onto the wheelchair. Refer to REMOVING/INSTALLING CAPTAIN'S SEAT in PROCEDURE 9 of the owner's manual, part number 1080737.

REPLACING CAPTAIN'S SEAT (FIGURE 8)

1. Remove the Captain's seat from the wheelchair. Refer

to REMOVING/INSTALLING CAPTAIN'S SEAT in

PROCEDURE 9 of the owner's manual part number

1080737.

F

W

D

W

H

E

E

L

C H A I R S

Joystick Mounting

Seat Frame

2. Remove the four (4) hex screws and washers that se-

Bracket

Assembly

cure existing captain's seat to the seat frame assembly.

3. Line up mounting holes in the new captain's seat

FIGURE 6 - REPLACING ARMREST PLATE

REPLACING SEAT POSITIONING STRAP (FIGURE 7)

NOTE: The following procedure is for Captain's Seats only.

1.

Remove the Captain's seat from the wheelchair. Refer

 

to REMOVING/INSTALLING CAPTAIN'S SEAT in

 

PROCEDURE 9 of the owner's manual, part number

 

1080737.

2.

Remove the two (2) hex bolts, washers and locknuts

 

that secure the seat positioning strap to the seat frame

 

assembly.

 

with mounting holes in the seat frame assembly.

4.

Apply Loctite 242 to the hex screws.

5.

Install the four (4) hex screws and washers through

 

the seat frame assembly and into the new captain's

 

seat. Tighten securely.

6.

Install the new captain's seat onto the wheelchair.

 

Refer to REMOVING/INSTALLING CAPTAIN'S

 

SEAT in PROCEDURE 9 of the owner's manual, part

 

number 1080737.

Captain's Seat

3. Remove the two (2) halves of the seat positioning strap

Seat Frame

Seat Frame

from the seat frame assembly.

4. Position the two (2) new seat positioning strap halves

on the inside of the seat frame assembly as shown in

FIGURE 7.

Assembly

Assembly

Seat Positioning

Strap

Washer

Seat Frame

 

 

Assembly

 

Locknut

Hex Bolt

FIGURE 7 - REPLACING SEAT POSITIONING STRAP

Hex Screws

(Apply Loctite Washers

242)

FIGURE 8 - REPLACING CAPTAIN'S SEAT

REPOSITIONING MKIV JOYSTICK - CAPTAIN’S SEAT (FIGURE 9)

1.Turn the lever on the adjustment lock to release the adjustment lock from joystick mounting tube.

2.Remove the joystick from the wheelchair.

23

Page 23
Image 23
Invacare P9000 service manual Replacing Captains Seat Figure