PROCEDURE 8

FWD WHEELCHAIRS

F

W

D

W

H

E

E

L

C H A I R S

6.Torque the two (2) hex screws to 156-in/lbs.

7.Reinstall the two (2) caplug caps.

Wheelchair Frame

Bushing

Footboard

Caplug

Mounting

Washer

Bracket

Hex

Caplug Screw

Cap

FIGURE 3 - ADJUSTING FLIP-UP

REMOVABLE FOOTBOARD - ANGLE

REPLACING ARMREST PADS (FIGURE 5)

1.Remove the mounting screws that secures the front of the armrest pad to the armrest plate.

2.Remove the mounting screw that secures the rear of armrest pad and armrest insert to the armrest plate.

3.Remove the existing armrest pad and position the new armrest pad on the armrest plate.

4.Line up the mounting holes in the armrest insert, armrest plate and new armrest pad.

5.Reinstall the rear mounting screw through the armrest insert, armrest plate and armrest pad and tighten securely.

6.Reinstall the front mounting screw into the armrest plate and new armrest pad and tighten securely.

Height (FIGURE 4)

1.If necessary, remove the four (4) caplug caps.

2.Remove the hex screw, two (2) spacers, washers and locknut that secure one (1) of the footboard pivots to the footboard mounting bracket.

3.Repeat STEP 2 for opposite side of the wheelchair.

4.Move the footboard pivots to one (1) of five (5) positions.

5.Resecure the two (2) footboard pivots to the footboard mounting brackets with the hex screws, spacers, washers and locknuts. Refer to FIGURE 4 for the correct hardware orientation.

6.Torque the two (2) hex screws to 156in/lbs. and back off the hex screws 1/8-1/4 of a revolution.

7.If necessary, reinstall the four (4) caplug caps.

Footboard Mounting

Bracket

REAR

FRONT

Armrest

Armrest

Insert

Pad

Mount-

ing

MountingArmrest Plate Screw Screw

FIGURE 5 - REPLACING ARMREST PADS

REPLACING ARMREST PLATE (FIGURE 6)

1.

If necessary, remove the three (3) hex bolts, spacers

 

and locknuts that secure the joystick mounting bracket

 

to the armrest plate.

2.

Remove armrest pad. Refer to REPLACING

Flip Up Footboard

Hex

Screw

Five (5)

Mounting

Positions

Washer

 

ARMREST PADS in this procedure of the manual.

3.

Remove the lug bolt, washers and locknut that secure

 

the existing armrest plate to the seat frame assembly.

4.

Position the new armrest plate on the seat frame

 

assembly and secure with the lug bolt, washers and

 

locknut. Refer to FIGURE 2 for correct hardware

 

orientation.

5.

Reinstall armrest pad. Refer to REPLACING

 

ARMREST PADS in this procedure of the manual.

Caplug

Locknut

 

Cap

Footboard Pivot

FIGURE 4 - ADJUSTING FLIP-UP

REMOVABLE FOOTBOARD - HEIGHT

6.

If necessary, reinstall the three (3) hex bolts, spacers

 

and locknuts that secure the joystick mounting bracket

 

to the armrest plate.

7.

Repeat STEPS 1-6 for the opposite armrest plate,

 

if necessary.

22

Page 22
Image 22
Invacare P9000 service manual Replacing Armrest Pads Figure, Replacing Armrest Plate Figure, Height Figure