Invacare X-Terminator QR manual Inspect/Adjust Weekly, Inspect/Adjust Monthly, Safety Inspection

SECTION 3—SAFETY INSPECTION

❑Inspect wheel/fork assembly for proper tension by spinning caster; caster should come to a gradual stop.

❑Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.

❑Ensure wheel bearings are clean and free of moisture.

❑Inspect tires for flat spots and wear.

❑If pneumatic tires check for proper inflation.

❑Check that all labels are present and legible. Replace if necessary.

Inspect/Adjust Weekly

❑Ensure hand grips (if equipped) are not loose.

❑Ensure quick release axles and camber inserts are clean.

❑Ensure quick/quad release axles lock properly.

❑Inspect handrims for signs of rough edges or peeling.

❑Inspect spokes for bent or broken spokes.

❑Ensure All spokes uniformly tight.

CAUTION

As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and should be replaced if damaged.

❑Inspect wheel/fork assembly for proper tension by spinning caster; caster should come to a gradual stop.

❑Inspect tires for flat spots and wear.

❑Ensure that casters are free of debris.

❑If pneumatic tires check for proper inflation.

Inspect/Adjust Monthly

❑Ensure wheel locks DO NOT interfere with tires when rolling.

❑Ensure pivot points are free of wear and looseness.

❑Inspect upholstery fastening flaps to ensure they securely latch.

❑Ensure that casters are free of debris.

❑Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.

❑Ensure adjustable axle position camber bar is securely tightened.

Part No 1114851 25 Everyday and Sport Series Wheelchairs